Scott Walker
scott18w@vt.edu
wylescoyote@gmail.com
scott18w@vt.edu
wylescoyote@gmail.com
EDUCATION
Master of Industrial Systems 2015 (planned)
Management Systems Engineering
Virginia Tech, Blacksburg, VA
Master of Business Administration 1987
Bowling Green State University, Bowling Green, OH G.P.A 3.14/4.00
Thesis – “Corporate Social Responsibility”
Bachelor of Science in Mechanical Engineering 1983
Ohio Northern University, Ada, OH G.P.A. 3.24/4.00
TEACHING EXPERIENCE
The StartUp Class, Lead Spring, 2015
Virginia Tech, Blacksburg, VA
Lean StartUp Seminar Fall, 2014, Spring 2015
NuSpark
Virginia Tech, Blacksburg, VA
Introduction to Engineering and Customer Discovery Summer, 2014
CEED
Virginia Tech, Blacksburg, VA
I-Corps, Adjunct Summer, 2014
Blacksburg Roanoke Region Node
Virginia Tech, Blacksburg, VA
The StartUp Class, GTA Spring, 2014
Virginia Tech, Blacksburg, VA
Thinking Like an Entrepreneur, GTA Fall, 2013
Virginia Tech, Blacksburg, VA
Graduate Certificates
Future Professoriate Graduate Certificate Fall, 2014
Graduate College
Virginia Tech, Blacksburg, VA
The Future Professoriate Graduate Certificate requires nine hours of graded graduate level course work in Preparing the Future Professoriate, Contemporary Pedagogical Practices and Practicum.
Engineering Education Certificate Fall, 2015
Graduate College, College of Engineering
Virginia Tech, Blacksburg, VA
The Engineering Education Graduate Certificate requires thirteen hours of graded graduate level course work in Foundations of Engineering Education, Practicum, Preparing the Future Professoriate, Pedagogical Practices in Contemporary Contexts, Assessment Techniques in Engineering Education and Engineering Education Research Methods.
ACADEMIC COMMUNITY
Innovation Pathway Minor – Coordinator for multi-disciplinary group of faculty to create a new minor – 2014,2015
Permanent course offerings – wrote and successfully submitted course offerings for a new class: The StartUp Class, 2014
Work on permanent course offerings of Thinking Like an Entrepreneur and The StartUp Capstone Class 2015
Mentor and Pseudo GA – Assisted with the CREATE! class for innovation and creativity – 2014
Professional Practice and Entrepreneurship - Mentor for Industrial Design Class (IDS 4044) - 2014
GUMP – Graduate Undergraduate Mentoring Program – Virginia Tech, 2014
PROFESSIONAL EXPERIENCE
Technimark LLC, Asheboro, NC 2002 to present
Project Engineer, Collegiate Relations (current – part time)
Director of Product Development (2011-2012),
Design and Development Manager (2003 - 2011),
Project Engineer (2002 - 2003)
Technimark is one of the top 25 largest injection molding companies in the United States. They have 7 plants in the US, 2 in Mexico, one in Germany and one in China. For the past five years Technimark has been awarded P&G’s Outstanding Plastics Supplier and we were rewarded in 2009 by Wal-Mart with their Excellence in Sustainability Award. Our top customers are P&G, Wal-Mart, Henkel, Estee Lauder, Clorox, Hershey, Reckitt Benckiser, Blockbuster and Black & Decker. We also have projects ongoing with many other consumer packaging and industrial accounts.
Develop new and promote existing business through customer presentations and conferences. Work with client's marketing, design and engineering departments. Present new products, new processes, new materials and new technology in an effort to obtain new and increase existing business.
Lead the design group of 6 engineers responsible for the design, engineering and project management of injection molded plastics for the consumer packing industry and for various industrial applications.
Create, Design & Engineer products for Fortune 50 customers from initial concepts, through product development, into full production through complete product lifecycle. Volumes of finished components generally require multiple cavitation molds running on high speed molding presses often with automated assembly.
Manage the professional development of engineers, advise the group on possible solutions to problems and provide a sounding board when necessary. Schedule group resources to ensure timely completion to meet customer requirements. Utilize both external and internal resources to accomplish design and time goals. Develop new technologies in molding, materials, processes, automation and decoration to gain additional market share and improve operating costs.
Innovate through design, processes, materials and equipment. Win customers through innovate design by implementing technologies that are new to the industry, new to our customers or new to our processes. Create engineered designs utilizing the latest CAD technology, providing FEA analysis and running mold filling scenarios with Moldflow software.
Assist the division managers in their quoting process by providing detailed calculation of costs of goods sold and capital. Provide customers with capital and piece part costs, and project timelines from US, European and Asian facilities. Analyze design configurations using Ansys software.
Project management role consists of meeting with customers and their industrial design firms, working with their consumer research groups, providing detailed CAD data, running Moldflow analysis, calculating stresses, physical testing of parts, providing customer and manufacturing documentation for production manufacture. Work with vendors to ensure customer’s requirements are fulfilled, communicate information to Tooling, Automation, Material Supply, Production, Accounting and Management necessary to complete project milestones on time, every time.
Established ISO criteria for design group to which all projects are documented.
Marconi Communications, Welcome, NC 2000 to 2001
Senior Design Engineer
Key Technology (formerly SRC Vision), Medford, OR 1998 to 1999
Senior Design Engineer
B/E Aerospace Corporation, Winston-Salem, NC 1991 to 1998
Project Engineer, Senior Design Engineer, Product Manager
Ditel, Inc., Hickory, NC 1989 to 1990
Manager of Manufacturing
Volvo Truck Corporation, Greensboro, NC 1989 & 2002
Contract Design Engineer
Siecor Corporation, Hickory, NC 1986 to 1989
Product Design Engineer
Globe Motors (formerly TRW Motor Division), Dayton, OH 1984 to 1986
Sales Engineer
CONFERENCE PRESENTATIONS
NCIIA Open 2015 Spring, 2015 (anticipated)
Presentation of Paper “Assessing the Change in Student Mindset in Entrepreneurial Education: Challenges and Next Steps”
ASEE 2015 Spring, 2015 (anticipated)
Presentation of Paper “Assessing the Change in Student Mindset in Entrepreneurial Education: A Review of Outcomes”
NCIIA Open 2014 Spring, 2014
Panel Discussion with Dr. Jack Lesko, Dr. Angela Shartrand, Dr. Oscar Ybarra and Dr. Catherine Amelink
“Assessment Methodologies for Entrepreneurship Education Around the Methods of the Lean LaunchPad”
PAPERS
ASEE 2015 Spring, 2015 (anticipated)
“Assessing the Change in Student Mindset in Entrepreneurial Education: A Review of Outcomes”
PROFESSIONAL DEVELOPMENT
Innovative Ideas 2014, Coursera Certificate,
How To Build a StartUp 2014, Udacity
Lean Six Sigma 2014, University of North Carolina, Charlotte, NC
Chemistry II 2013, Catawba College, Salisbury, NC
Biology II 2013, Catawba College, Salisbury, NC
Chemistry I 2012, Catawba College, Salisbury, NC
Biology I 2012, Catawba College, Salisbury, NC
Corporate Communications 2012, Cornelius Associates, at Technimark LLC, Asheboro, NC
Solidworks CAD 2010, TriMech Solutions, Charlotte, NC
Team Building Skills 2010, Cornelius Associates, at Technimark LLC, Asheboro, NC
Design of Experiments. 2008, University of Massachusetts at Lowell
Moldflow FEA 2007, Moldflow Corp, Boston, MA
Injection Mold Tool Design 2006, Society of Plastic Engineers, Charlotte, NC
Ansys Design Space FEA 2005, Mallett Technologies, Raleigh, NC
Rheology of Plastics. 2003, University of Massachusetts at Lowell
Basic Welding 2001, Davidson County Community College, Lexington, NC
Pro/Engineer CAD 1994 - on (more than 30,000 hours of design and detailing on Pro/E).
GD&T 1994, Forsyth Community College, Winston-Salem, NC at B/E Aerospace
Spanish II 1994, High Point University
Spanish I 1993, High Point University
EIT 1983, Passed first attempt
Society of Plastic Engineers
American Society of Engineering Education
Community
City of Salisbury Zoning Board of Adjustment, Alternate Member, 2009 – 2013
Catawba College, Placement Interviewer for Mock Interviews, 2011 - 2012
Forest Glen Homeowner Association, President, 2008 – 2011
Piedmont Environmental Alliance, Earth Day Fair Volunteer, 2009, 2010
PATENTS
4,834,486 Connector Sleeve Adaptor, Siecor Corporation, 1988
Inventor: Scott Walker
2007016914A1 Package Closure, Proctor & Gamble, 2007
Inventors: D. Gehring, N Lorinez, David Dawson, B Winslow. David was a direct report.
D660,603 Clothes Hanger, Technimark, LLC, 2011.
Inventors: R Dale Johnson and Jonathon Markey. Jonathan was a direct report.
TESTING AND ANALYSIS
Wipes Tub Design Analysis (2 part) – Analysis of design through tolerance build up study. Then applying actual measured data to the analysis and modifying either the product requirements, tolerance requirements, production requirements or tooling steel. Studies utilize CpK values in a range or 1.33 for critical relations and 1 or less for non-critical interactions.
Cosmetic Jar Assembly Design Analysis (6 part) – Analysis of design through tolerance build up study. Then applying actual measured data to the analysis and modifying either the product requirements, tolerance requirements, production requirements or tooling steel. Studies utilize CpK values in a range or 1.33 for critical relations and 1 or less for non-critical interactions.
Bleach Cap Torque – Child Resistant Cap Testing for spin off torque using different designs of retention ledges and different materials
Makeup Jar Inner Cup Retention and Spin Force – Insertion force data collection along with after insertion torque testing using different bead designs, interference designs and different material
Hanger Load – Clothes hanger loading in multiple direction recording weight and deflection using different web designs and materials.
Makeup Lid Retention – Lid retention force testing for removal force under simulated storage and operating temperatures and humidity.
Makeup Compact Weight Loss – Simulated a long term event – determined the product’s weight loss through the sealing mechanism under high heat and high humidity conditions
Compact Opening Force – Material and interference testing of opening force of a makeup compact lid
Wipes Tub Latch Load FEA – FEA analysis of deflection given different material and design parameters
Wipes Tub Racking FEA – FEA analysis of deflection given different design parameters
Master of Industrial Systems 2015 (planned)
Management Systems Engineering
Virginia Tech, Blacksburg, VA
Master of Business Administration 1987
Bowling Green State University, Bowling Green, OH G.P.A 3.14/4.00
Thesis – “Corporate Social Responsibility”
Bachelor of Science in Mechanical Engineering 1983
Ohio Northern University, Ada, OH G.P.A. 3.24/4.00
TEACHING EXPERIENCE
The StartUp Class, Lead Spring, 2015
Virginia Tech, Blacksburg, VA
Lean StartUp Seminar Fall, 2014, Spring 2015
NuSpark
Virginia Tech, Blacksburg, VA
Introduction to Engineering and Customer Discovery Summer, 2014
CEED
Virginia Tech, Blacksburg, VA
I-Corps, Adjunct Summer, 2014
Blacksburg Roanoke Region Node
Virginia Tech, Blacksburg, VA
The StartUp Class, GTA Spring, 2014
Virginia Tech, Blacksburg, VA
Thinking Like an Entrepreneur, GTA Fall, 2013
Virginia Tech, Blacksburg, VA
Graduate Certificates
Future Professoriate Graduate Certificate Fall, 2014
Graduate College
Virginia Tech, Blacksburg, VA
The Future Professoriate Graduate Certificate requires nine hours of graded graduate level course work in Preparing the Future Professoriate, Contemporary Pedagogical Practices and Practicum.
Engineering Education Certificate Fall, 2015
Graduate College, College of Engineering
Virginia Tech, Blacksburg, VA
The Engineering Education Graduate Certificate requires thirteen hours of graded graduate level course work in Foundations of Engineering Education, Practicum, Preparing the Future Professoriate, Pedagogical Practices in Contemporary Contexts, Assessment Techniques in Engineering Education and Engineering Education Research Methods.
ACADEMIC COMMUNITY
Innovation Pathway Minor – Coordinator for multi-disciplinary group of faculty to create a new minor – 2014,2015
Permanent course offerings – wrote and successfully submitted course offerings for a new class: The StartUp Class, 2014
Work on permanent course offerings of Thinking Like an Entrepreneur and The StartUp Capstone Class 2015
Mentor and Pseudo GA – Assisted with the CREATE! class for innovation and creativity – 2014
Professional Practice and Entrepreneurship - Mentor for Industrial Design Class (IDS 4044) - 2014
GUMP – Graduate Undergraduate Mentoring Program – Virginia Tech, 2014
PROFESSIONAL EXPERIENCE
Technimark LLC, Asheboro, NC 2002 to present
Project Engineer, Collegiate Relations (current – part time)
Director of Product Development (2011-2012),
Design and Development Manager (2003 - 2011),
Project Engineer (2002 - 2003)
Technimark is one of the top 25 largest injection molding companies in the United States. They have 7 plants in the US, 2 in Mexico, one in Germany and one in China. For the past five years Technimark has been awarded P&G’s Outstanding Plastics Supplier and we were rewarded in 2009 by Wal-Mart with their Excellence in Sustainability Award. Our top customers are P&G, Wal-Mart, Henkel, Estee Lauder, Clorox, Hershey, Reckitt Benckiser, Blockbuster and Black & Decker. We also have projects ongoing with many other consumer packaging and industrial accounts.
Develop new and promote existing business through customer presentations and conferences. Work with client's marketing, design and engineering departments. Present new products, new processes, new materials and new technology in an effort to obtain new and increase existing business.
Lead the design group of 6 engineers responsible for the design, engineering and project management of injection molded plastics for the consumer packing industry and for various industrial applications.
Create, Design & Engineer products for Fortune 50 customers from initial concepts, through product development, into full production through complete product lifecycle. Volumes of finished components generally require multiple cavitation molds running on high speed molding presses often with automated assembly.
Manage the professional development of engineers, advise the group on possible solutions to problems and provide a sounding board when necessary. Schedule group resources to ensure timely completion to meet customer requirements. Utilize both external and internal resources to accomplish design and time goals. Develop new technologies in molding, materials, processes, automation and decoration to gain additional market share and improve operating costs.
Innovate through design, processes, materials and equipment. Win customers through innovate design by implementing technologies that are new to the industry, new to our customers or new to our processes. Create engineered designs utilizing the latest CAD technology, providing FEA analysis and running mold filling scenarios with Moldflow software.
Assist the division managers in their quoting process by providing detailed calculation of costs of goods sold and capital. Provide customers with capital and piece part costs, and project timelines from US, European and Asian facilities. Analyze design configurations using Ansys software.
Project management role consists of meeting with customers and their industrial design firms, working with their consumer research groups, providing detailed CAD data, running Moldflow analysis, calculating stresses, physical testing of parts, providing customer and manufacturing documentation for production manufacture. Work with vendors to ensure customer’s requirements are fulfilled, communicate information to Tooling, Automation, Material Supply, Production, Accounting and Management necessary to complete project milestones on time, every time.
Established ISO criteria for design group to which all projects are documented.
Marconi Communications, Welcome, NC 2000 to 2001
Senior Design Engineer
Key Technology (formerly SRC Vision), Medford, OR 1998 to 1999
Senior Design Engineer
B/E Aerospace Corporation, Winston-Salem, NC 1991 to 1998
Project Engineer, Senior Design Engineer, Product Manager
Ditel, Inc., Hickory, NC 1989 to 1990
Manager of Manufacturing
Volvo Truck Corporation, Greensboro, NC 1989 & 2002
Contract Design Engineer
Siecor Corporation, Hickory, NC 1986 to 1989
Product Design Engineer
Globe Motors (formerly TRW Motor Division), Dayton, OH 1984 to 1986
Sales Engineer
CONFERENCE PRESENTATIONS
NCIIA Open 2015 Spring, 2015 (anticipated)
Presentation of Paper “Assessing the Change in Student Mindset in Entrepreneurial Education: Challenges and Next Steps”
ASEE 2015 Spring, 2015 (anticipated)
Presentation of Paper “Assessing the Change in Student Mindset in Entrepreneurial Education: A Review of Outcomes”
NCIIA Open 2014 Spring, 2014
Panel Discussion with Dr. Jack Lesko, Dr. Angela Shartrand, Dr. Oscar Ybarra and Dr. Catherine Amelink
“Assessment Methodologies for Entrepreneurship Education Around the Methods of the Lean LaunchPad”
PAPERS
ASEE 2015 Spring, 2015 (anticipated)
“Assessing the Change in Student Mindset in Entrepreneurial Education: A Review of Outcomes”
PROFESSIONAL DEVELOPMENT
Innovative Ideas 2014, Coursera Certificate,
How To Build a StartUp 2014, Udacity
Lean Six Sigma 2014, University of North Carolina, Charlotte, NC
Chemistry II 2013, Catawba College, Salisbury, NC
Biology II 2013, Catawba College, Salisbury, NC
Chemistry I 2012, Catawba College, Salisbury, NC
Biology I 2012, Catawba College, Salisbury, NC
Corporate Communications 2012, Cornelius Associates, at Technimark LLC, Asheboro, NC
Solidworks CAD 2010, TriMech Solutions, Charlotte, NC
Team Building Skills 2010, Cornelius Associates, at Technimark LLC, Asheboro, NC
Design of Experiments. 2008, University of Massachusetts at Lowell
Moldflow FEA 2007, Moldflow Corp, Boston, MA
Injection Mold Tool Design 2006, Society of Plastic Engineers, Charlotte, NC
Ansys Design Space FEA 2005, Mallett Technologies, Raleigh, NC
Rheology of Plastics. 2003, University of Massachusetts at Lowell
Basic Welding 2001, Davidson County Community College, Lexington, NC
Pro/Engineer CAD 1994 - on (more than 30,000 hours of design and detailing on Pro/E).
GD&T 1994, Forsyth Community College, Winston-Salem, NC at B/E Aerospace
Spanish II 1994, High Point University
Spanish I 1993, High Point University
EIT 1983, Passed first attempt
Society of Plastic Engineers
American Society of Engineering Education
Community
City of Salisbury Zoning Board of Adjustment, Alternate Member, 2009 – 2013
Catawba College, Placement Interviewer for Mock Interviews, 2011 - 2012
Forest Glen Homeowner Association, President, 2008 – 2011
Piedmont Environmental Alliance, Earth Day Fair Volunteer, 2009, 2010
PATENTS
4,834,486 Connector Sleeve Adaptor, Siecor Corporation, 1988
Inventor: Scott Walker
2007016914A1 Package Closure, Proctor & Gamble, 2007
Inventors: D. Gehring, N Lorinez, David Dawson, B Winslow. David was a direct report.
D660,603 Clothes Hanger, Technimark, LLC, 2011.
Inventors: R Dale Johnson and Jonathon Markey. Jonathan was a direct report.
TESTING AND ANALYSIS
Wipes Tub Design Analysis (2 part) – Analysis of design through tolerance build up study. Then applying actual measured data to the analysis and modifying either the product requirements, tolerance requirements, production requirements or tooling steel. Studies utilize CpK values in a range or 1.33 for critical relations and 1 or less for non-critical interactions.
Cosmetic Jar Assembly Design Analysis (6 part) – Analysis of design through tolerance build up study. Then applying actual measured data to the analysis and modifying either the product requirements, tolerance requirements, production requirements or tooling steel. Studies utilize CpK values in a range or 1.33 for critical relations and 1 or less for non-critical interactions.
Bleach Cap Torque – Child Resistant Cap Testing for spin off torque using different designs of retention ledges and different materials
Makeup Jar Inner Cup Retention and Spin Force – Insertion force data collection along with after insertion torque testing using different bead designs, interference designs and different material
Hanger Load – Clothes hanger loading in multiple direction recording weight and deflection using different web designs and materials.
Makeup Lid Retention – Lid retention force testing for removal force under simulated storage and operating temperatures and humidity.
Makeup Compact Weight Loss – Simulated a long term event – determined the product’s weight loss through the sealing mechanism under high heat and high humidity conditions
Compact Opening Force – Material and interference testing of opening force of a makeup compact lid
Wipes Tub Latch Load FEA – FEA analysis of deflection given different material and design parameters
Wipes Tub Racking FEA – FEA analysis of deflection given different design parameters